How to use a Jigsaw Step by Step Guide for Beginners?

Have you just bought a Jigsaw, a powerful and versatile cutting tool, for your different cutting purposes? Congratulations! As you have done a great job owning an amazing cutting tool.  But your excitement with your intricate cutting purposes may go off if you don’t know how to use this grand tool.

You know a Jigsaw with a right blade is capable of accomplishing your several cutting jobs. You can do straight as well as curved and circle cuts with this amazing tool according to your needs.

A Jigsaw is especially fit for your intricate cuts besides your normal cuts. You can make any shape whatever you like with different materials such as wood, ply board, laminated board, plastic, ceramics, stones, and metals.

So, let’s know how to use a Jigsaw step by step guide for beginners so that you can get the best result while cutting your materials.

How to use a Jigsaw Step by Step Guide for Beginners in 2018?

Select the right blade for your cutting purposes:

A Jigsaw is a cutter master! Yes, a jigsaw is absolutely a cutter master but it will depend on your choice of the right blade. It is expert to cut any material in a rapid motion up and down but for this result, you need to match a specific blade for the specific material you are going to cut.

Generally, a jigsaw blade is made of hardened steel, high-speed steel, and bimetal. Among all these, a bimetal blade is the best one as it will serve you 10 times better than the others.

Then for your better cutting result, blade teeth are matter. You need to match the TPI of the blade with the thickness of your materials. If you are going to cut a material with a thickness of .6 inch, a blade with 12-16 teeth per inch will result in a smooth cutting and in case of 0.3 inches, it will easier and comfortable.

If you are dealing with a tight corner, then you should get narrow scrolling blades to enjoy a smoother cutting. But while cutting a thicker material straightly, you must have a wider blade for better performance.

Prepare your materials:

 Already you have chosen a right blade. It’s great for a better cutting result. Now you should prepare your material you are going to cut. For example, if you are going cut a ply board, you should collect it from the market, then choose a place where there is enough light.
You should also get a pencil and scale to mark a shape on the material for a cutting guideline.

Take a measurement and mark a cut line on your material:

Now for better and easy cutting, you need to get a template of paper with an appropriate measurement. Then mark a cut line on your material which will make your cutting process easier and accurate.

Keep the material you are going to cut on a clamp or workbench:

After taking a measurement, placing your cutting material on a clamp or workbench will fasten your material which will make your jigsaw use more easy and comfortable.  Thus, it will bring you a good cutting result.

Place the blade close to the edge of your material where you will begin to cut:

Now everything is ready. You are at the moment to start your cutting. Place the blade from where you are going to cut. Then squeeze the trigger of your saw slowly and push the blade onward into the material you are cutting now and guide the saw through the cut line.

Some More Useful Tips to Remember When Using a Jigsaw:

  • Don’t get forget to wear a protection glass as chips and sawdust can hit your eyes and hurt them.
  • If you are using an electric jigsaw, don’t forget to have an extension cord. It will help you if you need to go a few steps away to cut.
  • Don’t forget to collect a clamp as it will fasten your material in a particular place. It will help you to control the saw and reduce the vibration created by the saw.
  • Don’t cut too fast. It will overheat the blade and the motor of the saw which may result in splintering causing harm your blade and also saw.

Leave a Reply

Your email address will not be published. Required fields are marked *